CHECK YOUR AIR CONDITIONER COMPATIBILITY BEFORE ORDERING. Please see the compatibility section below. 

• For window or split-type air conditioners with a socket plug (0.5 to 2.5 HP).
• Compatible with all manual dial window-type air conditioners. For digital control window-type and split-type air conditioners (0.5 to 2.5 HP), please read the details below:
• Compatible with inverter or non-inverter units.
• Compatible with U-shaped ground pins.
• DO NOT USE WITH ANY ADAPTER OR EXTENSION.
• PLUG DIRECTLY INTO THE WALL AIR CONDITIONER OUTLET.
• If you are using circuit breakers, the air conditioner plug will not fit. You will need extension wiring and an additional wall socket for the air conditioner.
• This device cannot control the settings of your air conditioner or other appliances; it can only control the input and output of electricity to your appliances.

AUTOSTART FEATURE: When the air conditioner is turned on to cool settings and you unplug the unit from the wall socket for 10 seconds, then plug it back in, the air conditioner should still run at the same settings. If your air conditioner is in standby mode after doing this or has different settings, it does not have an AutoStart feature.

REPOWER STATUS ON: If your air conditioner’s repower status is ON, it means that if the power goes out and then comes back on, and your air conditioner remains ON, you can use our smart air conditioner plug. For testing purposes, the power must be out for at least 5 seconds.

REPOWER STATUS OFF: If your air conditioner’s repower status is OFF, you can still use the plug to monitor your energy consumption and turn off your air conditioner, but you cannot turn it on. If the power returns and your air conditioner is OFF, you can still use the plug, but only to turn the unit OFF and monitor energy usage. It cannot be turned ON using the app or voice commands.