- Keep out of reach of children.
- Adults, children, pets and plants, must not be in the area when UV-C lamp is in use.
- Exposure of more than 10 seconds may cause temporary irritation to skin and eyes.
- Avoid touching the UV-C bulb.
- Unplug when not in use.
1.Remove all packaging and plastic wrapping or film on the lamp, on initial set up.
2.Plug in UV-C Germicidal Sterilizer.
3.A red light will be on, once plugged in, indicating that the lamp is now ready to be used.
4.Press the desired time of exposure (15, 30, or 60 minutes) on the remote control.
For rooms below 30 sq. meter expose for 15 minutes,
For rooms above 30 sq. meter expose for 30 minutes,
For rooms above 75 sq. meter expose for 60 minutes.
5.Green light will flash on the desired timer chosen.
6.An audible beeping will be heard, this is the 10 seconds, warning for operator to leave the exposed area.
7.Lamp will automatically start after 10 seconds warning.
8.After the timer has ended the lamp will shut off, an audible beeping will be heard.
9.FOR OZONE VERSION: Please let the room sit or wait for a minimum of 60 minutes before entering the room, this ensures that the ozone has decreased. You may also open your windows to increase ventilation. (accumulated ozone will depend on the size of area exposed and time of exposure)
10.FOR NON OZONE VERSION: You may enter the room as soon as the unit is finished with exposure and it turned off.