IMPORTANT NOTES:
• Only one capacitor is required per switch.
• The capacitor must be installed between the bulb of Line 1.
• If multiple bulbs are connected to Line 1, they must be wired in parallel. Series wiring will not work.
• Do not install the capacitor on Line 2 or Line 3.

INCLUDED IN THE PACKAGE:
• The capacitor is already included with the Glass Wall Switch upon purchase. There is no need to buy it separately.

OPERATIONAL GUIDELINES:
• A buzzing sound during operation is normal.
• Follow the wiring diagram strictly to ensure proper installation.

WARNING:
• Incorrect wiring may cause permanent damage or failure.
• This product is non-returnable if damaged due to incorrect installation.
• Installation must be performed by a qualified electrician to prevent hazards.
• Proper line identification and correct installation are crucial—trial and error is not allowed.
• Provided wiring diagram (included with the Glass Wall Switch) must be followed precisely.

DISCLAIMER:
• Lasco is not liable for any damage resulting from improper use of this capacitor. Please refer to the Lasco Installation Guide for correct installation.